Looking for a commercial fire damage repair company in San Diego

6 Ways to Prevent Commercial Fire Damage

Any type of building can catch fire. Although fire departments have regulations regarding fire safety in a workplace, mistakes still happen. Luckily, you can always call a commercial fire damage repair company in San Diego to restore the building and fireproof it for the foreseeable future.

Just like a house fire, a commercial fire can be prevented if you take the proper safety precautions. When you know what may cause it, you’ll know how to fix it. In this article, we’ll take a look at 6 different ways to prevent the damage caused by a commercial fire. Keep reading to learn more.

How can commercial fire damage be prevented?

It can take some time until you fully develop a fire prevention plan. Here’s how to do it:

1. Limit fire hazards

We know that a fire can start anywhere inside a commercial building and cause damage. It can be through poorly maintained machinery, electrical issues, unsupervised candle use, careless cooking, smoking, as well as storing flammable materials improperly. To prevent this, instruct and educate your employees or tenants.

2. Create an insurance plan in case of a fire

Commercial fire damage can be expensive, so making sure that you’re protected will financially help you restore the building after the fire. It takes a lot of planning and extra time, but it’s going to be worth it in the long run.

3. Keep your safety equipment in good condition

Too many people fail to extinguish small fires and prevent them from becoming bigger due to a faulty fire extinguisher. Every few months, check your sprinkler system and alarm and replace outdated equipment. 

4. Regularly maintain your electric system and devices

One of the most common fire causes is a faulty electrical installation. If the wires are old or there is a circuit overload, it’s a matter of minutes before the fire starts. To prevent this, change your wiring system and have a certified electrician perform regular maintenance once every few months.

5. Enforce rules and regulations

Even when everything seems in order, there is always the human carelessness factor to consider. It can happen to anyone, but it would be better if it doesn’t happen at all. You can do this by informing your employees about the rules for fire prevention and performing emergency fire procedures on a regular basis.

Since smoking is one of the fire causes in commercial buildings, designate a safe place for smokers, away from the flammable and combustible materials. Remember that any type of exposure to smoke is bad for your health because of the various toxic chemicals it contains.

6. Develop a proper emergency procedure

Fire can cause general panic, and people might forget what their priorities are in this emergency. Developing a fire emergency procedure is crucial to ensure that everyone is safe and knows what to do. Here’s an example:

  • Sound the alarm and alert the fire department
  • Head towards the nearest emergency exit
  • Go to the assembly point and do a headcount
  • Wait for further instructions from the firefighters

Performing these procedures regularly will create a habit and people will know exactly where to go because they’ve already practiced it several times.

Looking for a commercial fire damage repair company in San Diego?

How can commercial fire damage be prevented

Risk Free Serv is a long-standing company that can assist you with all types of fire damage restoration services in San Diego. We can also fireproof your building to reduce the risk of a fire breaking out or serious damage occurring if it does.

Reach out to us today and enjoy a relaxing walk through Lomita while we meet your needs with utmost care and expertise.

Share this post

Share on facebook
Share on twitter
Share on linkedin
Share on email